 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Driving, Maintenance, Tuning / 4x4 Cars / June 2005Electronic transfer case.
The light on the 2x dash control switch goes on and off intermittently. It's seems like a loose wire somewhere. When the light is out, the transfer won't work. Any ideas out there? The vehicle is a 2000 GMC Jimmy. Bye Growl <growldeep-newsgroups@yahoo.ca> Sun, 29 May 2005 18:49:16 -0230 Hi, did you get your problem resolved? I have a 2000 GMC Envoy and the light is switching between 2 and 4 wheel drive for awhile and now, I think it is stuck on the 4 wheel drive mode... Is this the electronic module (controller) problem? I can hear the solinoid kicking back and forth when the light is switching. My problem was fixed by removing the wiring harness plug from the transfer case control module, cleaning a couple of corroded pins and plugging it back in. The 4x4 has worked fine since them. > Hi, did you get your problem resolved? I have a 2000 GMC Envoy and the > light is switching between 2 and 4 wheel drive for awhile and now, I > think it is stuck on the 4 wheel drive mode... Is this the electronic > module (controller) problem? I can hear the solinoid kicking back and > forth when the light is switching. Bye Growl <growldeep-newsgroup@yahoo.ca> Wed, 22 Jun 2005 18:55:38 -0230 |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.