Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / 4x4 Cars / April 2006

Tip: Looking for answers? Try searching our database.

throttlebody to reg carb.

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
slr - 23 Apr 2006 10:23 GMT
I am in the process of changing the stock intake manafold and throttlebody
to a high performance intake and carberator in a 88 4x4 chevy
silverado.Will there have to be any other changes to make this work?
Mike Romain - 23 Apr 2006 18:01 GMT
You will likely need a fuel line pressure regulator because the FI pump
likely puts out too much.

Lots of carb engines need a fuel return line to help stop vapor lock.
Your FI engine might have one as well.  It is important on some FI
systems as the returning fuel goes to a cooling jacket on some pumps and
fills up a baffle area so the pump still has fuel to pick up when the
tank is low and you corner.  

My Jeep for instance has a filter just before the carb with 2 outlets on
it.  The center one goes to the carb, the top one goes to the return
line.  It is important the return line is above the carb line to avoid
gas siphoning back to the tank when it sits and to let air go back if
the gas vaporizes from heat (vaporlock).

I think I would put the pressure regulator just before the filter.  The
carb should say what line pressure is needed.

Is your ignition system tied into the FI?  You might need a stand alone
distributor/spark system or it might already have it.

Just some thoughts for you...

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos:  Non members can still view!
Jan/06 http://www.imagestation.com/album/pictures.html?id=2115147590
(More Off Road album links at bottom of the view page)

> I am in the process of changing the stock intake manafold and throttlebody
> to a high performance intake and carberator in a 88 4x4 chevy
> silverado.Will there have to be any other changes to make this work?
SnoMan - 23 Apr 2006 18:48 GMT
>You will likely need a fuel line pressure regulator because the FI pump
>likely puts out too much.

Yes you need to step it down to about 5 PSI as stock TBI pump
deleivers about 13 to 15 PSI to TBI regulator which delivers between
10 and 11 PSI to injectors.
-----------------
The SnoMan
www.thesnoman.com
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.