Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Acura Cars / December 2004

Tip: Looking for answers? Try searching our database.

PCV Valve

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Doug Holtz NOSPAM in adress - 20 Nov 2004 01:36 GMT
Group;

I was looking thru my maintenance records on my 89 Legend Coupe and see I
ever did a PCV valve.  My silver shop manual shows it under a valve cover,
with a gasket and exit hose.  I've replaced the hose when it broke a few
years ago.

Has anyone else forgotten to change this?  What is the symptoms of an engine
that needs this valve replaced?  I pass all emissions.

TNX

Doug
Natman - 20 Nov 2004 01:42 GMT
>Group;
>
[quoted text clipped - 9 lines]
>
>Doug

You don't need to change it, although it doesn't hurt to do so. You
can remove and clean it with carb cleaner.
Doug Holtz NOSPAM in adress - 20 Nov 2004 13:04 GMT
Natman;

I have carb cleaner and will remove it and see if it needs a bath.  TNX

Doug

>>Group;
>>
[quoted text clipped - 13 lines]
> You don't need to change it, although it doesn't hurt to do so. You
> can remove and clean it with carb cleaner.
MZ - 20 Nov 2004 02:17 GMT
Pull it out and shake it, if it rattles it's fine.
> Group;
>
[quoted text clipped - 9 lines]
>
> Doug
Doug Holtz NOSPAM in adress - 20 Nov 2004 13:03 GMT
MZ;

OK.  It is under a "lid" on the valve cover, and has a gasket that goes with
it.  With my past luck, I will need a new gasket just to test it.  OY.

Doug

> Pull it out and shake it, if it rattles it's fine.
>> Group;
[quoted text clipped - 10 lines]
>>
>> Doug
Natman - 20 Nov 2004 17:31 GMT
>MZ;
>
>OK.  It is under a "lid" on the valve cover, and has a gasket that goes with
>it.  With my past luck, I will need a new gasket just to test it.  OY.
>
>Doug

The gasket is a rubber O-ring and is usually reusable. I've cleaned my
PVC valve many times and never replaced it.
Michael Pardee - 20 Nov 2004 12:40 GMT
If the PCV valve becomes stuck open, idle can become rough. If stuck closed
(more common) crankcase pressure will build up from blow-by and force oil
out of the engine, usually from the dipstick tube. That can be very
dramatic - I lost nearly 3 quarts of oil between the time I saw the blue
smoke behind me and the time I could take the next freeway exit when a
breather hose plugged up in my Volvo. The engine was covered in oil.

Mike

> Group;
>
[quoted text clipped - 9 lines]
>
> Doug
Doug Holtz NOSPAM in adress - 20 Nov 2004 13:01 GMT
Michael;

Whew.  I am leaking oil from somewhere.  Don't know exactly.  Thanks for the
reply; I will check it out.

Doug

> If the PCV valve becomes stuck open, idle can become rough. If stuck
> closed (more common) crankcase pressure will build up from blow-by and
[quoted text clipped - 18 lines]
>>
>> Doug
TeGGer? - 21 Nov 2004 01:40 GMT
> If the PCV valve becomes stuck open, idle can become rough. If stuck
> closed (more common) crankcase pressure will build up from blow-by and
> force oil out of the engine, usually from the dipstick tube.

Before it goes out the dipstick tube it will try to fill up the intake with
oil through the crankcase breather. Check the breather tube for the
presence of oil, and check the intake in that vicinity for oily gunk.

The dipstick leak will come after the breather gets blocked.

Signature

TeGGeR?

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Jafir Elkurd - 20 Nov 2004 17:41 GMT
On those engines, when the PCV valve goes bad, you'll usually start leaking
oil out of the side cover gaskets. (which can damage the oxygen sensors).

> Group;
>
[quoted text clipped - 9 lines]
>
> Doug
rastapasta - 03 Dec 2004 23:17 GMT
> On those engines, when the PCV valve goes bad, you'll usually start
> leaking oil out of the side cover gaskets. (which can damage the oxygen
[quoted text clipped - 13 lines]
>>
>> Doug

Isn't it nuts how a simple $3 part (or a few shots from a can of carb
cleaner) can screw the engine so badly?
Doug Holtz NOSPAM in adress - 04 Dec 2004 00:46 GMT
>> On those engines, when the PCV valve goes bad, you'll usually start
>> leaking oil out of the side cover gaskets. (which can damage the oxygen
[quoted text clipped - 21 lines]
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.804 / Virus Database: 546 - Release Date: 11/30/2004

New PCV Valve came in to dealer.  Now I need to get it and install it.

Oil IS leaking from heads, and other un-seen spots.

Doug
E. Meyer - 04 Dec 2004 16:13 GMT
If you have oil leaking from around the heads, pick up a new set of valve
cover gaskets from the dealer while you are there. .

>>> On those engines, when the PCV valve goes bad, you'll usually start
>>> leaking oil out of the side cover gaskets. (which can damage the oxygen
[quoted text clipped - 27 lines]
>
> Doug
Doug Holtz NOSPAM in adress - 04 Dec 2004 21:34 GMT
> If you have oil leaking from around the heads, pick up a new set of valve
> cover gaskets from the dealer while you are there. .
[quoted text clipped - 30 lines]
>>
>> Doug

Got the PCV valve installed.  Got the new rectangle gasket, valve, washer,
and tube for $71.00.  The old one was really stuffed with crap.  Runs great.
Now to see if it continues to leak.

doug
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.