Eh Tegger

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Devils Advocate - 17 Sep 2006 23:36 GMT

I recently asked how to removed a altenator from a 93 acura and here was
your response.

> Pop the balljoint taper out of the lower control arm. This will allow you
> to swing the driveshaft and steering knuckle forwards enough to be able to
> drop the alternator from between the driveshaft and the firewall. Remove
> the road wheel first.

Wanted to let you know, even w/ those instructions the there is not enought
room to allow the altenator to fit down. What has to be done is remove the
cv axle altogether, then take down the altenator.

Reply to this Message

TeGGeR® - 18 Sep 2006 13:43 GMT

> I recently asked how to removed a altenator from a 93 acura and here
> was your response.
[quoted text clipped - 7 lines]
> enought room to allow the altenator to fit down. What has to be done
> is remove the cv axle altogether, then take down the altenator.

Oh well. Guess my memory was faulty on that one. Thanks for the correction.

Signature

TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message