Front bulk-head mounting bolt torque

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

williammaw@aol.com - 13 Nov 2008 21:33 GMT

Does anybody know what the approximate torque for the 12 MM front bulk-
head mounting bolts would be for a four door 92 Acura Legend? The
bulkhead is the horizontal member that attaches to the front end of
the frame where the bumper cover is attached to.

Thank you in advance ...

Reply to this Message

Tegger - 13 Nov 2008 22:45 GMT

"williammaw@aol.com" <williammaw@aol.com> wrote in news:09c85c81-3e4b-47bc-
9636-46541800c7b5@b38g2000prf.googlegroups.com:

> Does anybody know what the approximate torque for the 12 MM front bulk-
> head mounting bolts would be for a four door 92 Acura Legend? The
> bulkhead is the horizontal member that attaches to the front end of
> the frame where the bumper cover is attached to.
>
> Thank you in advance ...

I do believe you mean the bumper reinforcing bar mounting bolts.

Are you referring to the four bolts that become visible when the signal
lamps are removed from the bumper? If so, these are tightened to 16 ft lbs,
or "nice and snug", whichever is easier. I don't think I've ever personally
measured the torque on those bolts, myself.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message

williammaw@aol.com - 14 Nov 2008 00:26 GMT

> I do believe you mean the bumper reinforcing bar mounting bolts.
>
[quoted text clipped - 4 lines]
>
> --

Yes. Thank you so much.

Reply to this Message