1990 Acura axle

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Adam Green - 13 Feb 2009 19:18 GMT

1990 Integra GS 5 speed with ABS,left side(drivers side) axle needs
to be replaced,does the axle pop out from the output shaft or is it held
on with a clip,almost all the parts houses I call claim that it does not
matter if the car has ABS or not when ordering a replacement.

Reply to this Message

Tegger - 13 Feb 2009 21:01 GMT

adamblacke@webtv.net (Adam Green) wrote in news:24706-4995C791-739
@storefull-3211.bay.webtv.net:

> 1990 Integra GS 5 speed with ABS,left side(drivers side) axle needs
> to be replaced,does the axle pop out from the output shaft or is it held
> on with a clip,almost all the parts houses I call claim that it does not
> matter if the car has ABS or not when ordering a replacement.

It's held in by a clip, but it pops out pretty easily with a pry bar. You
don't even need to drain the tranny when removing the driver's side.

If I were you, I would call the dealer and ask if the driveashafts for that
car have different part numbers depending on ALB/ABS or not. If they do,
then there is a difference.

Signature

Tegger

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/

Reply to this Message