 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Alfa Romeo Cars / January 2005Air Bag Light, Help Required
I needed to remove and re-fit my drivers seat in my GTV 2ltr TS which was carried out OK but since the electrical connector to the seat belt pretensioner was disconnected and reconnected the Air Bag warning light stays on. How can I reset this or is this a dealer job?. (I have tried disconnecting the battery for an hour or so then reconnecting to no avail.)  SignatureAndy Wilson Dealer job IMHO... > I needed to remove and re-fit my drivers seat in my GTV 2ltr TS which was > carried out OK but since the electrical connector to the seat belt [quoted text clipped - 5 lines] > -- > Andy Wilson Does any one know what the typical Alfa dealer charges for a simple re-set like this? Andy Wilson > Dealer job IMHO... > [quoted text clipped - 8 lines] >> -- >> Andy Wilson I got it done free under warranty ! while it was in for a service... Domestos > Does any one know what the typical Alfa dealer charges for a simple re-set > like this? [quoted text clipped - 13 lines] > >> -- > >> Andy Wilson Have you tried asking your local independent Alfa specialist if he can reset it. The one I used reset my engine warning light when I had problems with the crank position sensor. (He wouldn't tell me how to do it though - something to do with grounding the correct contact on the ecu). Paul Mosley > I needed to remove and re-fit my drivers seat in my GTV 2ltr TS which was > carried out OK but since the electrical connector to the seat belt [quoted text clipped - 4 lines] > disconnecting the battery for an hour or so then reconnecting to no > avail.) Can anyone recommend an Independent Alfa Specialist in South Hampshire who would undertake this? Andy Wilson > Have you tried asking your local independent Alfa specialist if he can > reset it. The one I used reset my engine warning light when I had problems > with the crank position sensor. (He wouldn't tell me how to do it though - > something to do with grounding the correct contact on the ecu). > > Paul Mosley |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.