85 fiero wiper motor replacement help

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

FieroTO85 - 23 Jan 2007 19:18 GMT

Hi guys/gals,

This is the first time posting.
I have owned my fieror for the past 16 years.
Here is the problem. My wiper moter stopped working last week-end. The
motor probably died due to ice build up under the wiper assembly.
Found a replacement motor. Removed the 3 screws, but having trouble
removing the linkage from motor to the wiper ball assembly.
Any help would be appreciated.

fyi . located in toronto, ON.
Des.

Reply to this Message

FieroTO85 - 24 Jan 2007 15:58 GMT

Went by Joe from FieroSHOP in Toronto. He helped me with some notes.
1st you have to remove the grill by removing 4 star screws.
Remove the wiper blade assembly by inserting a needle/pin to pulling
the blades.
Pop the grill.
Loosen but not remove 2 - 10mm nuts that holds the ball to the
assembly.
The Motor/Wiper assembly pops out after you removed the 3 screws.
Just thought someone might find it helpful.
thanks,
D. TO
85 Fiero SE 4cy.

> Hi guys/gals,
>
[quoted text clipped - 8 lines]
> fyi . located in toronto, ON.
> Des.

Reply to this Message

tom@fieronews.net - 28 Jan 2007 16:07 GMT

Good info as I am going to have to do this myself. My wiper motor
on my 85 only works on high. Crazy stuff.

--
--------------------------------- --- -- -
Posted with NewsLeecher v3.7 Final
Web @ http://www.newsleecher.com/?usenet
------------------- ----- ---- -- -

Reply to this Message