will it work?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

realeast7@hotmail.com - 14 Oct 2007 04:52 GMT

hey i was wondering if anyone has ever put a tail piece(the section
with the two back windows) from a GT onto a SE? would you have to
change the tail lights?

Reply to this Message

B Fuhrmann - 14 Oct 2007 11:42 GMT

<realeast7> wrote ...

> hey i was wondering if anyone has ever put a tail piece(the section
> with the two back windows) from a GT onto a SE? would you have to
> change the tail lights?

Yes

The shape of the GT rear clip is very different from the notch back. You
are also going to need the trunk lid and the lower part.

Signature

Bill Fuhrmann

Reply to this Message

realeast7@hotmail.com - 14 Oct 2007 15:32 GMT

On Oct 14, 7:42 am, "B Fuhrmann" <b-fuhrmann-
use...@mplsfridayDELETEskate.com> wrote:

> <realeast7> wrote ...
>
[quoted text clipped - 9 lines]
> --
> Bill Fuhrmann

so id have to baisically put the whole rear body from the gt on?

Reply to this Message

Luc Giguère - 14 Oct 2007 19:44 GMT

If you want to convert your notchback to a fastback, you will have to change
at least, the rear lid, the tail lights and the engine glill on each side of
the deck lid. I am not sure if the trunk will fit.

read this http://www.fiero.net/showroom/fastback.html

have fun

> hey i was wondering if anyone has ever put a tail piece(the section
> with the two back windows) from a GT onto a SE? would you have to
> change the tail lights?

Reply to this Message