Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Audi Cars / February 2008

Tip: Looking for answers? Try searching our database.

turn signal stops flashing

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
KLS - 28 Sep 2005 01:10 GMT
Hi, folks.  1998.5 2.8l A4 here, and just this past week, the turn
signal lights, both left and right, stop blinking after anywhere from
2-18 blinks and just stay on.  All the bulbs are good.  What could be
wrong?  Should I replace the fuse?  
Pete - 28 Sep 2005 01:17 GMT
> Hi, folks.  1998.5 2.8l A4 here, and just this past week, the turn
> signal lights, both left and right, stop blinking after anywhere from
> 2-18 blinks and just stay on.  All the bulbs are good.  What could be
> wrong?  Should I replace the fuse?

Most likely the blinker/hazards relay which is unfortunately integrated
with the hazard lights button in the center console.  These relays like
to fail quite often, at least on the B5 A4.

Cheers,

Pete
daytripper - 28 Sep 2005 02:43 GMT
>> Hi, folks.  1998.5 2.8l A4 here, and just this past week, the turn
>> signal lights, both left and right, stop blinking after anywhere from
[quoted text clipped - 4 lines]
>with the hazard lights button in the center console.  These relays like
>to fail quite often, at least on the B5 A4.

I'd suspect the stalk turn signal switch assembly first...
Peter Bell - 28 Sep 2005 09:12 GMT
> >> Hi, folks.  1998.5 2.8l A4 here, and just this past week, the turn
> >> signal lights, both left and right, stop blinking after anywhere from
[quoted text clipped - 6 lines]
>
> I'd suspect the stalk turn signal switch assembly first...

Umm.... "signal lights ... stop blinking ... just stay on"

I fail to see how this could be the stalk switch!

I'm with Pete - most likely the relay (it failed, in exactly the same
way, on my 2000 A6 after three years).

Signature

Peter Bell  (Note Spamtrap - To reply, replace 'invalid' with 'bellfamily')

KLS - 28 Sep 2005 13:52 GMT
>> >> Hi, folks.  1998.5 2.8l A4 here, and just this past week, the turn
>> >> signal lights, both left and right, stop blinking after anywhere from
[quoted text clipped - 13 lines]
>I'm with Pete - most likely the relay (it failed, in exactly the same
>way, on my 2000 A6 after three years).

Thanks for your suggestions, everyone!  I'll stop at Holtz on my way
in this morning and find out their price on the relay replacement job.
Pete - 28 Sep 2005 17:51 GMT
> Thanks for your suggestions, everyone!  I'll stop at Holtz on my way
> in this morning and find out their price on the relay replacement job.

Let us know how it goes.  The part itself is about $20.  The labor maybe
another $20.  You could do it yourself, although taking the part out is a
bit of a PITA.  My dealer actually broke off the retaining clips on the
center console trim piece while he was removing it.

Cheers,

Pete
KLS - 29 Sep 2005 11:29 GMT
>> Thanks for your suggestions, everyone!  I'll stop at Holtz on my way
>> in this morning and find out their price on the relay replacement job.
[quoted text clipped - 3 lines]
>bit of a PITA.  My dealer actually broke off the retaining clips on the
>center console trim piece while he was removing it.

Ha.  The price I got was $45 for the part and $55 for the labor.  This
is from the dealer.  The nearest independent shop has been raising its
rates to the point that they're almost as expensive as the dealer, and
I don't think they're as good.  Other shops are 20+ miles away, and we
all know how much time and gas is worth, so I'll be letting the dealer
do the job.  Later.  Not right now, gotta pay off some bills first.
Pete - 29 Sep 2005 14:47 GMT
> Ha.  The price I got was $45 for the part and $55 for the labor.  This
> is from the dealer.

Yeah, dealer prices vary.  I actually had mine done in Poland and paid close
to what you got quoted as well... maybe somewhat less for labor.

Cheers,

Pete
LS1/A4 - 11 Feb 2008 14:25 GMT
Same thing just happend to me. When I put the turn signals on they jus
stay on, no blinking, but when I push the emergency flasher they work!
don't here any clicking or anything, I hope it's not the stalk I saw th
write up for that, seems like a PITA/waste of time, taking the airba
out, jees! Anyone want to chime in on this? Think it's still the relay

--
LS1/A
Pete - 13 Feb 2008 02:51 GMT
> Think it's still the relay?

Yes.

Pete
Dennis Wyatt - 28 Sep 2005 13:21 GMT
My 01 A4 needed a new emergency Flasher unit when the turn signals quit.
BeKay - 06 Nov 2005 03:45 GMT
What is the location of the flasher unit? Easy to change? My '99 A4 stopped
working yesterday. Thanks.
Pete - 06 Nov 2005 03:52 GMT
> What is the location of the flasher unit? Easy to change? My '99 A4
> stopped
> working yesterday. Thanks.

You mean the hazards/turn signal relay?  It's integrated with the hazard
light switch in the center console.  You need to remove that narrow trim
piece that covers it.  It's a bit tricky to remove - you can end up
breaking the little clips that hold that trim piece in place.  I had
dealer remove mine, and they still managed to break them.

Pete
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2010 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.