Hi:
I bought this 2000 A4 1.8T Q MT 2 weeks before. after two days the
windshield washer warning comes up. I refilled it, 3 days later comes
again. So, I think there must be leak some where. Any ideas? Is this a
big job? Should I do it at dealers or some other work shop?
I have a 6 month Lubrico Warranty with the car, since I bought it
from a used car dealer. Will they cover this leak?by any chance anyone
konws?
Thanks you very much!
husky
Kcvwdoc - 05 Sep 2003 14:53 GMT
To: ming <mingwuming@hotmail.com>
Re: windshield washer leak!
By: ming <mingwuming@hotmail.com> to alt.autos.audi on Fri Sep 05 2003 02:16 pm
> I bought this 2000 A4 1.8T Q MT 2 weeks before. after two days the
> windshield washer warning comes up. I refilled it, 3 days later comes
> again. So, I think there must be leak some where. Any ideas? Is this a
> big job? Should I do it at dealers or some other work shop?
The headlamp washer pump is more than likely leaking. They tend to crack and
then come apart and leak. You will have to replace the pump.
Have a Great day!
kcvwdoc
--- Synchronet 3.10L-Win32 NewsLink 1.43
* Friends of Bill W - Raytown,MO - telnet://friendsofbillw.dyndns.org
Alex - 05 Sep 2003 18:50 GMT
Probably the headlight washer pump. It is a common failure.

Signature
Alexandre
2001 Audi A4 2.8QM
> Hi:
> I bought this 2000 A4 1.8T Q MT 2 weeks before. after two days the
[quoted text clipped - 8 lines]
>
> husky
christoph - 05 Sep 2003 20:25 GMT
I've got the same problem with my 99 A4 2.8...
It appears to leaking from the bottom of the resevoir. The dealer said it
may be a gasket? or something like that... 1-2 hours minimum labor
charges... I've kinda learned to deal with it. When I get ready to sell it -
I will fill it will washer fluid - so the display goes out.... I know it's
sneaky, but that's how we bought it, apparently...
Thanks,
C
99 A4 2.8Q
98 323ic
96 LR Discovery I
> Probably the headlight washer pump. It is a common failure.
>
[quoted text clipped - 13 lines]
> >
> > husky
Yuri - 07 Sep 2003 07:09 GMT
> I've got the same problem with my 99 A4 2.8...
>
[quoted text clipped - 3 lines]
> - I will fill it will washer fluid - so the display goes out.... I know
> it's sneaky, but that's how we bought it, apparently...
Huh! 1 to 2 hours labor? I'm an almost all thumbs type of do it your selfer,
but I've managed to repair or replace the windshield reservoirs on 4
generations of Audis. I've done the replacements well under an hour, and
that's without prior knowedge of how they were mounted. In two instances
the problem turned out to be simply the hose seperating from the tank,
while the other times the reservoirs cracked. The first time I replaced the
reservior with a new one purchased from an on line Audi parts dealer for
less than $50 and the other time I bought one from a junk yard for less
than $20, again on line. Bottom line this is an item you can do yourself in
under an hour. It's about as complex as changing the oil on the car.
Kcvwdoc - 07 Sep 2003 10:54 GMT
To: Yuri <vox@hotmail.com>
Re: Re: windshield washer leak!
By: Yuri <vox@hotmail.com> to alt.autos.audi on Sun Sep 07 2003 07:09 am
> Huh! 1 to 2 hours labor? I'm an almost all thumbs type of do it your selfer,
> but I've managed to repair or replace the windshield reservoirs on 4
[quoted text clipped - 6 lines]
> than $20, again on line. Bottom line this is an item you can do yourself in
> under an hour. It's about as complex as changing the oil on the car.
Think so huh!
Most models with the split headlamp washer pump require removel of lower engine
shield, LF wheel, inner fender liner, and removing 3 bolts securing reservoir.
Then you have to remove old washer pump and replace with new updated pump.
What's new about it....the connector on your wiring harness will have to be
replaced to fit the new pump. They changed the shape. This requires you to have
the skill and tools to remove old connector and replace with new connector.
This procedure is easy for a tech and doesn't take a lot of time. Because we
have the tools and skills.
have fun!
Have a Great day!
kcvwdoc
--- Synchronet 3.10L-Win32 NewsLink 1.43
* Friends of Bill W - Raytown,MO - telnet://friendsofbillw.dyndns.org
Yuri - 08 Sep 2003 01:35 GMT
> Think so huh!
>
[quoted text clipped - 8 lines]
> This procedure is easy for a tech and doesn't take a lot of time. Because
> we have the tools and skills.
If you are right about that fender liner then all I can say is that Audi is
building a better mouse trap for the consumer's wallet. There is no reason
to put together a design that requires pulling off the fender liner to
remove the washer reservoir. Maybe that's why Audi has fallen in the
customer satisfaction ratings. Notice that a number of respondents to this
thread turned away from the dealer and were just planning to pass this
problem on when they unloaded their cars. Given that type of attitude do
you think they are going to get another Audi? I doubt it. But, I shouldn't
just blame Audi, this is the type of "screw the consumer type of attitude"
that is endemic to the auto industry, in both the manufacturing and service
areas, more so in the service area.
By the way the guy should still take a shot at replacing that washer
himself. There is no greater satisfaction than doing the job yourself and
keeping the dollar out of the stealership's hands.
Kcvwdoc - 07 Sep 2003 23:58 GMT
To: Yuri <vox@hotmail.com>
Re: Re: windshield washer leak!
By: Yuri <vox@hotmail.com> to alt.autos.audi on Mon Sep 08 2003 01:35 am
> By the way the guy should still take a shot at replacing that washer
> himself. There is no greater satisfaction than doing the job yourself and
> keeping the dollar out of the stealership's hands.
But then again when you purchase a new car...you sure do want the techs there
to jump and fix your car at the low warranty labor times the factory pays us.
when these cars are out of warranty you are going to have to pay the piper. And
believe me when i say the cars being built in the last 3 years are very high
tech and you will be lucky to find any independents able to work on the
systems.
Good luck! :)
Have a Great day!
kcvwdoc
--- Synchronet 3.10L-Win32 NewsLink 1.43
* Friends of Bill W - Raytown,MO - telnet://friendsofbillw.dyndns.org
ccohen5@compuserve.com - 16 Jan 2004 16:51 GMT
Like the AMGs any engine maintenance on the new RS6 requires an
engine removal. Its the nature of the beast - imagine a 427 with
all today's safety and computer stuff in a Pinto or a Zephyr?
C
> To: Yuri <vox@hotmail.com>
> Re: Re: windshield washer leak!
[quoted text clipped - 20 lines]
> --- Synchronet 3.10L-Win32 NewsLink 1.43
> * Friends of Bill W - Raytown,MO - telnet://friendsofbillw.dyndns.org
eyeboy - 24 Feb 2009 19:29 GMT
i had this same problem suddenly appear on my allroad. i pulled th
fender liner and looked around and found that the line from the tank ha
separated from a splitter that directed the fluid to other lines. th
small plastic clip that 'held' the line on had come loose and fluid wa
leaking ever so slowly. i refit the line and the clip and all is well.
and by that i mean now i notice that the drivers side headlight washe
line also seems to have come loose and i will need to get under the ca
again to investigate that.
but! the tank doesn't drain every 2 days anymore, i just avoid usin
the headlight washer
--
eyebo
JPF - 08 Sep 2003 01:55 GMT
Get a grip.
The washer reservoir is down inside wasted space for two reasons.
It absorbs energy in a collision, and it keeps 15 pounds of weight
down low.
Perhaps when you design cars, we can go back to the '66 Galaxie....
The '66 Galaxie had no fender liners or under panels. The water bag
was hung on two screws. You could change it yourself with ease. Of
course, it got 6 miles to the gallon and killed everyone inside upon
impact.
Snip...........
Yuri - 10 Sep 2003 01:57 GMT
> Get a grip.
> The washer reservoir is down inside wasted space for two reasons.
[quoted text clipped - 7 lines]
> course, it got 6 miles to the gallon and killed everyone inside upon
> impact.
Valid point about the placement of the washer but I doubt if safety was the
primary reason for that particular method of mounting. The more likely
reason was cost and time during the manufacturing process. By the way Audi
didn't place that high on the crash worthiness test even with the placement
of the collapsible water cell, doing double duty as a washer reservoir,
down low in engine bay.
I guess you gripped a little too hard when you came up with that
explanation.
ccohen5@compuserve.com - 16 Jan 2004 16:51 GMT
You are right. My Galaxie was also so flexible that even with a
full cage I could feel the thing bend. Especially on fast down
hill turns
C
> Get a grip.
> The washer reservoir is down inside wasted space for two reasons.
[quoted text clipped - 9 lines]
>
> Snip...........
ming - 05 Sep 2003 23:57 GMT
Hi:
Thanks for all helps!
I went back to the used car dealership, they replaced the washer
pump(For windshield)with no charge at all. They bought the part from
audi dealer right away. :)
But at the same time, I found the headlamp washer does not work! the
cap is not going to open. I asked them to fix it, they said no~ :(
thanks again for help
husky
Interious - 06 Sep 2003 18:08 GMT
I have a 99.5 A4 that had the same problem--the headlight washer fluid
pump disintegrated, producing a gusher of a leak. Since that thing
reportedly uses gobs of fluid to wash the headlights, I simply pulled
the bad pump and replaced it with a wine bottle cork, which fit
perfectly. No problems since.
Dave
>Hi:
> I bought this 2000 A4 1.8T Q MT 2 weeks before. after two days the
[quoted text clipped - 8 lines]
>
>husky