Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / BMW Cars / November 2006

Tip: Looking for answers? Try searching our database.

1987 325is turbocharger kit - just a bit of help needed

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
news - 07 Nov 2006 23:11 GMT
Hi there,

I have hesitated to post here, as usually I am able to find some kind of
instruction guide somewhere via google, but I am seriously stumped and un
able to find the info I really need.

Some quick history: i have a 87 325is e30 m20 2.5liter with conforti TMS
chip. all other upgrades have been replaced with turbo componants (headers,
etc etc)

I ordered a SPA Turbo bmw 325 turbo kit not realizing it was for 95-99 year
325i's (e36) . rather then returning it, I chose to modify to make it all
fit and stuff. The manifold was converted easily however now because the
only way to fit the "log" style manifold made for an e36 was to flip it over
so that instead of the turbo being mounted on the underside of the manifold
at the back of the engine (closest to front window) it is mounted on the top
of the manifold at the front with the compressor  at the front and the
blower behind it ..so my first question.

Q: is it ok that the compressor and blower have traded positions?

Now the reason why i need all this help is cause my kit (spa turbo) came
with no instructions.

so i am just winging it. and for my next dilema that is completely stopping
completion, is that;

A) I have no idea where all the hoses go, i don't know which are supposed to
be hooked up to vacuum before throttle, after throttle, etc etc So what
would i need to connect to where
?

there is one vacuum on the BOV, there is one for stock FPR, and one for the
new AFPR and also there are connectors on a couple pipes for the intercooler
piping. what are they for:?? ALSO there are 3 holes on my wastegate, the
larger one on the bottom of the wastegate i assume is for the boost guage,
but what about the other 2? one smaller on bottom and one large on side.

AFPR...do i hook that up to my stock FPR? it also has vacuum line...it will
goto same spot as stock FPR for vacuum ?

ok so with that out of the way, next i really could use some help figureing
out which tube piece goes where in order where should the BOV tube be
placed..etc etc anyones 2 cents are welcome
hsg@h-gee.co.uk - 08 Nov 2006 21:49 GMT
As one that used to fit /build turbo cars for Toyota in the UK perhaps I can
help but never did a BMW I do have some basic knowledge.

Trading places - no problem but be careful that the oil feed and drain
connections are in a vertical plain - oil drain at the bottom!

Oil drain to sump MUST be above normal full oil level and unrestricted at all
times - sump oil must NEVER reach the drain connection.  An oil cooler in the
circuit is desirable but not a necessity.

Fuel supply should be increased when under boost and I suggest that no more than
5psi unless you have lowered the compression ratio.  7psi in theory = 50% more
power but in reality about 30% taking into account the heat generated in the
compressed air.  An inter cooler might be nice if you could plumb it in.

EGRs work on vacuum and vacuum is only developed when not on boost so stock
connection points should be OK for the vacuum tubes.

The throttle venturi develops a differential in pressure so all connections
should follow stock as far as possible and check valves might be needed on some
(doubtful) but maybe a touch of super-glue on the rubber hose ends to stop the
pressure blowing them off.

Turbo waste gate should be actuated by manifold pressure.

There are a great number of books about and one UK publication which I had some
input to is "Alan Allard's" Turbocharging and supercharging - circa 1985 so
might be out of print but he might sell you a copy - look him up on Google and
mention my name - won't get it any cheaper but it looks nice on the bookshelf.

Petersen Publishing did a few turbo books too...............

My library is a bit old now but if you want to talk off list please feel free
to.

Regards

Hugh

>Hi there,
>
[quoted text clipped - 40 lines]
>out which tube piece goes where in order where should the BOV tube be
>placed..etc etc anyones 2 cents are welcome

Sir Hugh of Bognor

The difference between men and boys is the price of their toys.

Intelligence is not knowing the answer but knowing where and how to find it!

Hugh Gundersen
hsg@h-gee.co.uk
Bognor Regis, W.Sussex, England, UK
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.