reset inspection and oilservice

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Toine - 12 Nov 2006 12:27 GMT

Who can tell me to reset oilinspection and inspection off my BMW 1998

Thanks

Reply to this Message

Josh Assing - 13 Nov 2006 00:45 GMT

There's code - reader/reset tools out there.

On older (my 92 for example) you can use a bit of wire & jump two connectors to
reset it.

does the 98 have a round or rectangular port?

>Who can tell me to reset oilinspection and inspection off my BMW 1998
>
[quoted text clipped - 3 lines]
>------= Binary Usenet downloading made easy =---------
>-= Get GrabIt for free from http://www.shemes.com/ =-

--- AntiSpam/harvest ---
Remove X's to send email to me.

Reply to this Message

UKOBD - 13 Nov 2006 08:37 GMT

Hi,

You can either do this as part of diagnostic tool, or with a
stand-alone reset tool.

We stock the full range of BMW diagnostic and reset tools, inc. service
(http://www.ukobd.co.uk/site/catlist.asp?id=9) - you may be able to
find a supplier of Peake Research tools in the Netherlands.

You should have a 20-pin round connector under the bonnet of your car
for this purpose.

I hope this helps.

Gareth

> There's code - reader/reset tools out there.
>
[quoted text clipped - 13 lines]
> --- AntiSpam/harvest ---
> Remove X's to send email to me.

Reply to this Message

Dave Plowman (News) - 13 Nov 2006 09:09 GMT

> Who can tell me to reset oilinspection and inspection off my BMW 1998

Do a Google on BMW Service Indicator. You'll get half a million results.
;-)

Signature

*No I haven't stolen it , I'm just a sh.t driver*

Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.

Reply to this Message