> >> That's some really BAD ADVICE.. if the oil pressure is low - the
> engine
[quoted text clipped - 4 lines]
> > than once. So before checking anything else I'd try a new one, or do a
> > proper pressure check.

Signature
*Real women don't have hot flashes, they have power surges.
Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
>> >> That's some really BAD ADVICE.. if the oil pressure is low - the
>> engine
[quoted text clipped - 8 lines]
>
> Indeed. And it's quite possible the new one has failed too.
And at this point the best test for this would be to screw a real gage
into the head and measure the oil pressure.
Anthony Wilson - 16 Jan 2007 16:25 GMT
> >> >> That's some really BAD ADVICE.. if the oil pressure is low - the
> >> engine
[quoted text clipped - 11 lines]
> And at this point the best test for this would be to screw a real gage
> into the head and measure the oil pressure.
Same thing happened to me, same car. I had it checked at the shop. Oil
system is okay, dashboard is known for horrible errors and maintenance. It
also tells me "brake light" when the light is fine. Stereo also beeps "CLN"
for "clean" for the tape heads when there is no tape playing. They want one
grand to replace dashboard, I said no way. 1988 is horrible for electronics,
I've fixed about everything electric on that car, seats, windows, you name
it.
Dave Plowman (News) - 16 Jan 2007 16:50 GMT
> >>> True. But BMWs seem to be fitted with the most unreliable oil
> >>> pressure warning switch I've known. All mine have had this fail, and
> >>> some more than once. So before checking anything else I'd try a new
> >>> one, or do a proper pressure check.
> >> Dave - if you reread the original posting - his mechanic already
> >> replaced the oil pressure sensor.
> > Indeed. And it's quite possible the new one has failed too.
> And at this point the best test for this would be to screw a real gauge
> into the head and measure the oil pressure.
Absolutely. Certainly before dismantling the engine looking for faults
that may not exist.

Signature
*Be nice to your kids. They'll choose your nursing home.
Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
E28 Guy© - 16 Jan 2007 19:34 GMT
> >> Dave - if you reread the original posting - his mechanic already
> >> replaced the oil pressure sensor.
[quoted text clipped - 3 lines]
> And at this point the best test for this would be to screw a real gage
> into the head and measure the oil pressure.
The best, but not necessarily the most cost-effective. These senders
are unreliable for a reason: they're cheap (or is it the other way
around?). About $6 new. I'd probably spring for as many as 3 of 'em
(I seriously doubt the failure rate is over 66% new; and I've got two
running M30s at my place now, so the odds are good I'll need 'em
someday.) and replace them before paying for a pressure check. Total
cost would be about $20 for the senders. If all indicate low pressure,
then I'd believe them (collectively) and start troubleshooting the oil
system - starting with the banjo bolts.
--
C.R. Krieger
(Been there; done that)
Dave Plowman (News) - 17 Jan 2007 00:14 GMT
> The best, but not necessarily the most cost-effective. These senders
> are unreliable for a reason: they're cheap (or is it the other way
[quoted text clipped - 5 lines]
> then I'd believe them (collectively) and start troubleshooting the oil
> system - starting with the banjo bolts.
If you DIY, probably as cheap to buy a gauge and check it yourself - it
doesn't need to be a super accurate gauge as a few psi either side doesn't
matter.

Signature
*A bartender is just a pharmacist with a limited inventory.
Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.