In my Bentley manual it shows removing what it calls the 'outer window
channel seal' by driving a wooden wedge up under the lower edge from below.
Included is a warning not to damage the paint.
Also it says on convertible models to remove the trim at the ends of the
seal by prying out the rivets. It shows a picture of a plate mounted to the
edge of the door held on by pop rivets.
> How does the chrome trim underneath the windows come off? I know how
> to remove the top trim across the drip edge, just need to know how the
> two pieces (one on the door and the other underneath the pop out
> window) come off. Thanks in advance...
Psycho - 26 Mar 2007 01:38 GMT
Thanks for the reply. I'll look into this. I'm not worried about the
paint as I want to remove it so I can sand and paint. Could tape it
off but get a much better result by removing extra trim...
>In my Bentley manual it shows removing what it calls the 'outer window
>channel seal' by driving a wooden wedge up under the lower edge from below.
[quoted text clipped - 8 lines]
>> two pieces (one on the door and the other underneath the pop out
>> window) come off. Thanks in advance...