Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / BMW Cars / July 2008

Tip: Looking for answers? Try searching our database.

325 AC - where do you put the R-12?

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
cosmo - 01 Jul 2008 15:50 GMT
When recharging the AC on a 1988 325 where do you screw the can in? If
I'm standing at the passenger side fender looking down into the engine
compartment I can see three obvious fittings; one on a line on top of
the fender near the strut tower, one on the rear end of the compressor
body and one near the sight glass. Which one is it? Thanks as always.
Michael Yeager - 02 Jul 2008 16:12 GMT
>When recharging the AC on a 1988 325 where do you screw the can in? If
>I'm standing at the passenger side fender looking down into the engine
>compartment I can see three obvious fittings; one on a line on top of
>the fender near the strut tower, one on the rear end of the compressor
>body and one near the sight glass. Which one is it? Thanks as always.

 You want the low pressure side which is the one by the strut tower.
I may catch heat for this but if you have to ask which port to use, I
would like to point out that adding refridgerant can be a hazardous
activity. Try not to get hurt... :)
R. Mark Clayton - 03 Jul 2008 11:36 GMT
>>When recharging the AC on a 1988 325 where do you screw the can in? If
>>I'm standing at the passenger side fender looking down into the engine
[quoted text clipped - 6 lines]
> would like to point out that adding refridgerant can be a hazardous
> activity. Try not to get hurt... :)

I have done this, but usually if you need to add refrigerant more than once
in a blue moon*, you probably have a leak and will waste your money.

Usually the top up can comes with full instructions.

If you have some other fault (like failed compressor or just the belt off)
then you might overpressurise the system :-(.

A proper service removes the old refrigerant (for recycling), adds new and
lubricant.  They can also insert dye markers to trace leaks.

Make sure you work in a well ventilated area, wear goggles etc., because as
the man says you don't want to get hurt or worse.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.