Turn signal not functioning

Turn signal not functioning - left side

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Troberts - 24 Jun 2006 22:48 GMT

Turn signal not functioning - Left side of car only (front and back)
not working. Right side works fine. Checked all bulbs. All good. Put
volt meter on left side in back and no energy when switch is on. If I
use the hazard switch, it is the same problem. Right side works fine.
left side does not work. Therefore, I don't think this is a switch
issue. What do I do next?

Reply to this Message

Troberts - 24 Jun 2006 22:50 GMT

> Turn signal not functioning - Left side of car only (front and back)
> not working. Right side works fine. Checked all bulbs. All good. Put
> volt meter on left side in back and no energy when switch is on. If I
> use the hazard switch, it is the same problem. Right side works fine.
> left side does not work. Therefore, I don't think this is a switch
> issue. What do I do next?

BTW - This is a 95 325i.

Reply to this Message

nintiendo.com - 25 Jun 2006 10:55 GMT

> > Turn signal not functioning - Left side of car only (front and back)
> > not working. Right side works fine. Checked all bulbs. All good. Put
[quoted text clipped - 4 lines]
>
> BTW - This is a 95 325i.

It could be a flaw in the switch contacts for the 4 way flasher switch.
(Based on past experience with a Jeep) Try turning the 4 way switch on
and off several times.

Reply to this Message

Troberts - 27 Jun 2006 23:43 GMT

Not it. Removed flasher and still have issue with turn switch.

What about the relay in the fuse box?

> > > Turn signal not functioning - Left side of car only (front and back)
> > > not working. Right side works fine. Checked all bulbs. All good. Put
[quoted text clipped - 8 lines]
> (Based on past experience with a Jeep) Try turning the 4 way switch on
> and off several times.

Reply to this Message