My 323i is slow to engage in reverse when cold. I thought this might be
caused by low transmission fluid however there is no dipstick and no
information in the owners manual.
How can I check the fluid level?
TIA
> My 323i is slow to engage in reverse when cold. I thought this might be
> caused by low transmission fluid however there is no dipstick and no
> information in the owners manual.
If the fluid level was so low as to cause problems engaging reverse, it
wouldn't engage other gears either. Basically most jobs are done by
hydraulic pressure and if the pump input is below the level of the fluid
at all times you should be ok.
> How can I check the fluid level?
There's a filler plug on the side which also sets the max level.

Signature
*If you try to fail and succeed, which have you done? *
Dave Plowman dave@davenoise.co.uk London SW
To e-mail, change noise into sound.
> My 323i is slow to engage in reverse when cold. I thought this might be
> caused by low transmission fluid however there is no dipstick and no
> information in the owners manual.
>
> How can I check the fluid level?
Is this an automatic or manual transmission?