amp problems...Help.... please

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

David Miller - 27 May 2004 21:33 GMT

Hi all,
I have a toxic TX-1600 amp. It was fine worked fine with one of my subs.
I switched it off and sorted out the second sub, however I did not connect
it. Now whenever I connect the RCA sockets as soon as the outside of the RCA
comes into contact with the outside of the plug the red light lights and the
protection circuit kicks in. Any ideas? Is it solvable?

Dave

Signature

Help out an old wizard, visit this link:
http://www.esorcery.org/in.php?id=1165

Reply to this Message

Matt Fletcher - 27 May 2004 22:13 GMT

Has the ground cable come loose?

Just a suggestion im no expert

> Hi all,
> I have a toxic TX-1600 amp. It was fine worked fine with one of my subs.
[quoted text clipped - 4 lines]
>
> Dave

Reply to this Message

David Miller - 28 May 2004 07:25 GMT

I don't think so. I will check it out.
When I connect the am at home on a 12 v there are no problems. but I have
looked at the wiring in the car and cant find anything wrong.

Signature

Help out an old wizard, visit this link:
http://www.esorcery.org/in.php?id=1165

> Has the ground cable come loose?
>
[quoted text clipped - 11 lines]
> >
> > Dave

Reply to this Message

Matt Fletcher - 28 May 2004 11:07 GMT

I wouldn't wire it with the systems switched on. Are you wiring each sub to
a separate channel

> I don't think so. I will check it out.
> When I connect the am at home on a 12 v there are no problems. but I have
[quoted text clipped - 16 lines]
> > >
> > > Dave

Reply to this Message

David Miller - 28 May 2004 13:45 GMT

Yep it a 4 channel amp one on channel 1 and one on 3. The bloody thing works
on the dining room table but as soon as I hook it up to my pioneer 6400 it
refuses to work. Very frustrating

Signature

Help out an old wizard, visit this link:
http://www.esorcery.org/in.php?id=1165

> I wouldn't wire it with the systems switched on. Are you wiring each sub to
> a separate channel
[quoted text clipped - 21 lines]
> > > >
> > > > Dave

Reply to this Message