 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Driving, Maintenance, Tuning / Car Audio / June 2004impedence question
It's been a few years since i installed a system so i just wanted to run this by you guys to make sure i have it right. I have a 2 channel amp rated at 2x200w rms at 4 ohms or 1x800w max at 4 ohms. My 2 subs are JLaudio 10" rated at 8 ohms. Is it ok to hook up one sub to each channel or should i bridge the amp and wire both subs in parallel which will give me the 4 ohms the amp is rated for? -Jon bridge the amp and connect the speakers in parrellel. > It's been a few years since i installed a system so i just wanted to run this > by you guys to make sure i have it right. [quoted text clipped - 5 lines] > > -Jon > It's been a few years since i installed a system so i just wanted to run > this by you guys to make sure i have it right. [quoted text clipped - 5 lines] > > -Jon Bridge the amp and wire the subs in parallel. That will give an overall 4-ohm load to the single amplifier channel. Scott Gardner |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.