 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Driving, Maintenance, Tuning / Car Audio / February 2005sony amp problem...
Howdy all i've just got a problem with my sony xplod XM-754sx 4 channel amp... All of a sudden , every time i turn it on , the red OFFSET LED comes on and doesn`t work... just started straight away... I've tested it on the bench and it does the same thing , just with the + & - and the remote wire connected , no speakers.... any ideas ?? Cheers... Brad Verify that the Hi Voltage/Hi Current switch is set correctly on amp that have this switch. This should be set to Hi Current for speake loads of 1 to 2 ohms, or Hi Voltage for all other speaker loads. NOTE: For older amplifier models, the Hi Voltage/Hi Current switch i located on the bottom of the amplifier. Newer amplifiers do not hav this switch. Check the speaker wire connections for a short circuit. OR The Power/Protect light changes from green to red when the amplifier i overheated, a speaker wire has short circuited or DC current i generated. If the amplifier is very warm, allow it to cool down. Remove any tape or CD that may be in any connected equipment and powe down all connected equipment. Check for any short circuits in the speaker wiring -- sq4u |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.