Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Driving, Maintenance, Tuning / Car Audio / May 2006

Tip: Looking for answers? Try searching our database.

Sub Box Questions

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
WebLord - 07 May 2006 15:58 GMT
I just recently purchased a pair of JL Audio 13.5 inch Subs, but they
were installed in a box without a divider to seperate the two speakers
airspace?  Does this even matter?

Should these also be completley sealed air tight?  

Thank you!
Brandonb - 07 May 2006 17:34 GMT
It doesn't matter unless one gets blown, as at that point the paramaters
of the box change for the remaining good speaker, and will be more
likely to cause damage to it.

Brandonb

> I just recently purchased a pair of JL Audio 13.5 inch Subs, but they
> were installed in a box without a divider to seperate the two speakers
[quoted text clipped - 3 lines]
>
> Thank you!
MOSFET - 07 May 2006 22:47 GMT
> It doesn't matter unless one gets blown, as at that point the paramaters
> of the box change for the remaining good speaker, and will be more likely
> to cause damage to it.
>
> Brandonb

Heed Brandonb's warning.  This can, and does happen in the real world,
especially with high-power subs and amplifiers.  In a sealed enclosure, the
airspace behind a sub acts as a spring and helps control the motion of the
cone.  If one of the subs suddenly stops working, the air-space for the
working subwoofer will suddenly be doubled and thereby creating a much
looser spring.  This will cause greater motion of the cone and a decrease in
control that might lead to damage at high volume levels.  For this reason
ALONE, I always go with multi-chamber enclosures when building sealed boxes.

MOSFET
Captain Howdy - 07 May 2006 17:39 GMT
A divider is not needed for subs. If your box is a sealed type then yes it
should be air tight, if it's a ported type it should have an opening/s.

>I just recently purchased a pair of JL Audio 13.5 inch Subs, but they
>were installed in a box without a divider to seperate the two speakers
[quoted text clipped - 3 lines]
>
>Thank you!
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.