 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Driving, Maintenance, Tuning / Car Audio / August 2006Alarm System
Hi... I have a Viper 3000 alarm for my 87 Fiero GT, which up until recently worked fine. The problem now is - when I arm or disarm the alarm - my parking lights and brakes are supposed to flash on and off - but they don't. They both work as I checked that first - Can anyone shed any light on what could cause this and how t fix it? Many thanks.... Rick Do the parking lights work with your light switch? If they do then the problem is the alarm On the main alarm brain there is a white wire that is used for parking light flash. There should be a 7.5 or 10 amp fuse on that white wire If the parking lights do not work with the light switch then it is probably your parking light fuse in the vehicle fuse box. I think your fuse box is on the drivers side underdash near the firewall > Hi... > [quoted text clipped - 8 lines] > > Rick Yes - The parking lights work with my light switch - On this main alarm brain you mentioned - any idea where it normally would be? i.e., under the dash, in the engine area, etc ?? ---------------------------------------------------------------------------------------------------------------------------- > Do the parking lights work with your light switch? > If they do then the problem is the alarm [quoted text clipped - 17 lines] > > > > Rick most likely place is under the driver side dash > Yes - The parking lights work with my light switch - > On this main alarm brain you mentioned - any idea where it normally [quoted text clipped - 22 lines] >> > >> > Rick |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.