Programming '03 Buick LeSabre Keyless Entry

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Jeff Wisnia - 13 Jun 2006 19:19 GMT

My kid lost one of the two keyless entry fobs for our 2003 LeSabre.

I bought a replacement on eBay, but it arrived without any programming
instructions.

Is the programming something I can do through a procedure like switching
the ignition on and off in a pattern, and if so how? Will I have to
reprogram the other fob at the same time?

If programming requires connecting a scan tool, can I just jury rig a
jumper between the correct interface connector pins to get the job done?

Thanks guys,

Jeff

Signature

Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
"Life is like a sewer -- what you get out of it depends on what you put
into it."

Reply to this Message

Dan Beaton - 15 Jun 2006 22:13 GMT

Check your owner's manual. The procedure should be there.
Dan

(This account is not used for email.)

> My kid lost one of the two keyless entry fobs for our 2003 LeSabre.
>
[quoted text clipped - 11 lines]
>
> Jeff

Reply to this Message

Jeff Wisnia - 16 Jun 2006 02:56 GMT

Dan Beaton wrote:

> Check your owner's manual. The procedure should be there.
> Dan

Thanks, but I did that before I asked here.

Manual says, "Go see your Dealer."

Jeff

> (This account is not used for email.)
>
[quoted text clipped - 13 lines]
>>
>>Jeff

Reply to this Message