Diff side gears could be worn that is what the c clip rides against.
> Diff side gears could be worn that is what the c clip rides against.
Okay, so it's no big deal then. Those gears are pretty deep so there's
no risk it'll wear through, right? It might even be be possible to buy
another c-clip and put two on that side, IIRC the groove in the shaft
was pretty wide. Otherwise a trip to the hardware store and stack up on
a few washers might be a good idea until next time I change the diff oil.
>> My '97 Camaro Z28 has an annoying play in the drive axles allowing the
>> left disc to touch the caliper. I measured the play and it's about 1/4
[quoted text clipped - 14 lines]
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Ulf
Shep - 03 Aug 2006 00:42 GMT
Not a good idea, if 2 clips fit the axle groove is worn, 1/4" is way too
much, the c clip could come out if not corrected properly, you know what
happens then!
>> Diff side gears could be worn that is what the c clip rides against.
>
[quoted text clipped - 26 lines]
>> =----
> Ulf