Greetings,
I have a Black 2006 Ford F-150. Just last week, my neighbor painted
his home on a windy day. Need I say more. This idoit got paint all
over my vehicle and to make matters worse, the paint dry over the past
few days. Just baking in the summer heat. Is there anything I can do?
I've tried washing the vehicle with a pressure washer, but did not
remove a spot.
I've taken pictures for legal reason, for ths dumb a-hole going to pay!
Please help.
Thanks,
=?x-user-defined?Q?=AB?= Paul =?x-user-defined?Q?=BB?= - 03 Sep 2006 16:03 GMT
> Greetings,
> I have a Black 2006 Ford F-150. Just last week, my neighbor painted
[quoted text clipped - 8 lines]
>
> Thanks,
Bug and tar remover ought to easily remove the unwanted paint and not damage the
good paint.
TxSteven - 03 Sep 2006 16:25 GMT
Paul,
Will this damage my clear coat? I will surely give it a try.
Thanks :)
«» wrote:
> > Greetings,
> > I have a Black 2006 Ford F-150. Just last week, my neighbor painted
[quoted text clipped - 11 lines]
> Bug and tar remover ought to easily remove the unwanted paint and not damage the
> good paint.
=?x-user-defined?Q?=AB?= Paul =?x-user-defined?Q?=BB?= - 03 Sep 2006 20:32 GMT
> Paul,
>
> Will this damage my clear coat? I will surely give it a try.
> > Bug and tar remover ought to easily remove the unwanted paint and not damage the
> > good paint.
The Bug and Tar remover should say on the can. It's unlikely they would sell
something that will ruin the clearcoat, but you never know. Try it in an obscure
spot first.
I would not wait too long though. It's possible that water and car wash stuff
will still work for a few days yet.
sdlomi2 - 04 Sep 2006 07:32 GMT
Paul,
Will this damage my clear coat? I will surely give it a try.
Thanks :)
«» wrote:
> TxSteven wrote:
> >
[quoted text clipped - 14 lines]
> damage the
> good paint.
We used kerosene recently to remove tar acquired from a road-paving
project. It worked faster than the bug and tar remover we tried at first.
Car was headed for an auction & we wanted to clean it as fast as possible.
We just put it in an open-top plastic bucket and used a rag and washed it
down. (DID IT OUTSIDE FOR SAFETY REASONS.) It worked great AND looked
great--including doing no apparent harm to the clear-coat. We DID try it in
an inconspicuous place first. s
=?x-user-defined?Q?=AB?= Paul =?x-user-defined?Q?=BB?= - 04 Sep 2006 16:57 GMT
> We used kerosene recently to remove tar acquired from a road-paving
> project. It worked faster than the bug and tar remover we tried at first.
[quoted text clipped - 3 lines]
> great--including doing no apparent harm to the clear-coat. We DID try it in
> an inconspicuous place first. s
That is what I use on my own cars: GM, Ford, Chrysler.
Sometimes "mineral spirits" or lighter fluid depending on what's available.
jeffcoslacker - 03 Sep 2006 16:06 GMT
If it's just exterior latex, it should come off pretty easy, but you'll
have to "convince" it to start coming off, by getting an edge started
with a plastic razor blade or something similar, then peel.
They sell them at part stores...if it's oil based paint...you're
screwed...

Signature
jeffcoslacker
http://www.automotiveforums.com
thetoolman - 03 Sep 2006 16:33 GMT
> Greetings,
> I have a Black 2006 Ford F-150. Just last week, my neighbor painted
[quoted text clipped - 8 lines]
>
> Thanks,
If it were me I would take it to the Ford dealer where you bought the
truck and talk to body shop boss he might have good idea of how to get
latex paint off without killing the clearcoat finnish and you could get
an est. cost to take to your brain dead neighbor!!
If you don't want to take it to the dealer then I would go to a PRO
body shop NOT a OneDay shop and see what they say.
Good luck, Rick
lugnut - 04 Sep 2006 11:58 GMT
>Greetings,
>I have a Black 2006 Ford F-150. Just last week, my neighbor painted
[quoted text clipped - 8 lines]
>
>Thanks,
First, I would file a claim with his homeowners insurance
since he is responsible for the damage. Next, I would have
someone who knows what they are doing work with it. Your
truck may need to be repainted to repair the problem. My
'93 f150 experienced the same problem less than a month old.
The house paint was removed and it looked good but, a couple
of years later, the paint where the overspray had been began
to crack eventually having to be completely repainted at my
expense. You may also want to pressure them for deminished
value of the vehicle after it is repainted as it will reduce
the trade/sale value of the vehicle on a late model vehicle.
In most states, they are also responsible for this.
Lugnut
Reijo - 06 Sep 2006 06:20 GMT
Meguiars C-2000 Professional Detailing Clay ..or similar product
available from Carquest, NAPA or other auto parts stores.
> Greetings,
> I have a Black 2006 Ford F-150. Just last week, my neighbor painted
[quoted text clipped - 8 lines]
>
> Thanks,
ed - 06 Sep 2006 15:40 GMT
These guys will hate me for saying this, but OVEN CLEANER will soften that
stuff up BUT...... ya really have to watch how long you put it on there and
use small amounts, and IMMEDIATELY have water ready the minute you get off
what it is your after, then wash it all of right away. If your worried about
clearcoat and all that and its a good truck, mmm think this over real good.
The usual overn cleaners today have to sit a long long time before they will
even work and even then they only work for a minute or so before they loose
effectiveness once they intereact with the paint. If you have a couple good
coats under all that, clear coat etc, or can just put this stuff (say with a
cuetip or something) on what it is you want to soften up, then you'll be
alright. I absolutely must say use this as a last resort. I have done it on
my FORD, my BMW, Chevy and Jag too, after the local vandals spray painted
our cars and I did ok, but thats me. It was a long slow process. USE YOUR
OWN DISCRETION ON THIS TECHNIQUE. Only do this if you know what your
doing, AND if you know what your doing, you won't do this anyway. :)