I have a 96 Neon that starts and runs fine for several minutes (15-30)
and abruptly dies. When you try to restart it, it tries to fire but
won't. The rail is at 48-50 psi and the positive side of the injector
harness is hot. The MIL is on but I'm unable to retrieve the code(s) at
this point. When I check the ECM side of the injectors I get an
intermittent ground. KOEO, I have a solid ground on the ECM side of the
injector harness. When I try to start the engine, the ground disappears
or is intermittent. When the engine is cold the ECM side of injector
harness has the correct signal and the engine runs.

1) Is this a wiring problem or an ECM/sensor problem?

2) Could the cam sensor cause this?

3) Does Mitsubishi have a problem with injector drivers in their ECMs?

Any feedback on this problem would be greatly appreciated!

Thanks,
Dale Greep