update on 99 lumina cluster help --

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

JP - 11 Oct 2006 18:40 GMT

>From: "John" <john@nowhere.net>
>Subject: 99 lumina cluster help
>Date: Tuesday, October 10, 2006 11:43 AM

> I have a 99 Lumina that keeps blowing the "i/p electronics ignition
> feed"
>fuse as soon
>as I turn on the ignition.
>The mil, speedo and gauges don't work. The headlamp warning bell also stays
>on while the car is running.
>This all started after jump starting the car and replacing the battery.
>Any ideas? Maby shorted cluster and will the bezel come off without droping
>the
>panel below the steering column?
>Thanks, John

Update.
I have unpluged the cluster, the ECM and the body control module and it
still blows the fuse
as soon as I turn the key on. I can find no wires that look melted. I am
thinking about bypassing
the fuse with a wire and watching for the smoke, lol.
Any ideas at all?

Reply to this Message

Shep - 11 Oct 2006 21:05 GMT

Get a wiring diagram and look at what is powered in that circuit and trace
those wires, alldata.com is one source.

>>From: "John" <john@nowhere.net>
>>Subject: 99 lumina cluster help
[quoted text clipped - 21 lines]
> the fuse with a wire and watching for the smoke, lol.
> Any ideas at all?

Reply to this Message