1996 JGC limited hard-start & stalls

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

sarwarrior1@aol.com - 08 Nov 2006 23:58 GMT

I've replaced the fuel filter; fuel pump; crankshaft position sensor;
camshaft position sensor and PCM. The check engine light went out and
I'm not getting any error codes, however the jeep is hard to start and
stalls while driving. I'm out of ideas and I've taken it to two
different mechanics and spent lots of ca$h with zero results. ANY
IDEAS ARE WELCOME
This is a last ditch effort, next post will be for used JGC CHEAP!!!!

Reply to this Message

Mike Romain - 09 Nov 2006 00:34 GMT

Dirty battery cable ends or a weak battery cell can cause your issues.

So can a ratty connection on the body ground. There should be a cable
to the body someplace that might need a clean or a mesh strap from the
engine to the frame or body.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pictures.html?id=2115147590
(More Off Road album links at bottom of the view page)

> I've replaced the fuel filter; fuel pump; crankshaft position sensor;
> camshaft position sensor and PCM. The check engine light went out and
[quoted text clipped - 3 lines]
> IDEAS ARE WELCOME
> This is a last ditch effort, next post will be for used JGC CHEAP!!!!

Reply to this Message