94 Jeep GC no spark after transmission change

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

m611ott - 28 Dec 2006 16:36 GMT

Hi,

I just replaced a transmission in my 94 jeep grand Cherokee, 6 cylinder
and for some reason I have no spark and the engine will not start.
Engine ran fine before the transmission was replaced. I have gone over
all of the sensor plugs and inputs in the transfer case and
transmission several times, messed with the play in the shift linkage,
and I am not having any luck. I don't know where else to look, is
there some kind of computer controled glitch that is common?

Thanks in advance for your reply

Mark

Reply to this Message

Mike Romain - 28 Dec 2006 20:09 GMT

There is a Crankshaft position sensor at the top driver's side corner of
the bellhousing on the 4.0 engine. I would suspect that or it's
connection.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pictures.html?id=2115147590
(More Off Road album links at bottom of the view page)

> Hi,
>
[quoted text clipped - 9 lines]
>
> Mark

Reply to this Message