Most Common Gasoline Fuel Inector?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Brucebo - 18 Jan 2007 01:03 GMT

Does anybody out there know what is the most common / ubiquitous
make/model of gasoline fuel injector? Preferably one with lots of
aftermarket second source manufacturers.

-Bruce

bwbwrestor-usnet@yyyyyyyyyyyyyyyyahoo.commmmmmmm

Reply to this Message

Nate Nagel - 18 Jan 2007 01:06 GMT

> Does anybody out there know what is the most common / ubiquitous
> make/model of gasoline fuel injector? Preferably one with lots of
[quoted text clipped - 3 lines]
>
> bwbwrestor-usnet@yyyyyyyyyyyyyyyyahoo.commmmmmmm

I would guess whatever is used on either a 5-liter Mustang or TPI
small-block Chubby, but that's just a guess.

nate

Signature

replace "fly" with "com" to reply.
http://home.comcast.net/~njnagel

Reply to this Message

Mike Romain - 18 Jan 2007 01:33 GMT

>> Does anybody out there know what is the most common / ubiquitous
>> make/model of gasoline fuel injector? Preferably one with lots of
[quoted text clipped - 8 lines]
>
> nate

I will second that. The mustang 5.0 ones work in the Jeep I6 also which
is a really common engine.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pictures.html?id=2115147590
(More Off Road album links at bottom of the view page)

Reply to this Message

Steve - 19 Jan 2007 01:00 GMT

>> Does anybody out there know what is the most common / ubiquitous
>> make/model of gasoline fuel injector? Preferably one with lots of
[quoted text clipped - 6 lines]
> I would guess whatever is used on either a 5-liter Mustang or TPI
> small-block Chubby, but that's just a guess.

I was just going to say that one of the most easily obtainable is the
high flow-rate 5.0 Ford type that are (were?) available through Ford
Motorsports. People used to use those in all sorts of applications that
had nothing to do with Fords. They were probably built by Bosch or Siemens.

Reply to this Message

aarcuda69062 - 18 Jan 2007 02:28 GMT

In article
<1169082199.300439.154250@s34g2000cwa.googlegroups.com>,

> Does anybody out there know what is the most common / ubiquitous
> make/model of gasoline fuel injector? Preferably one with lots of
> aftermarket second source manufacturers.
>
> -Bruce

The most common would probably be the General Motors "Multec"
injector which is available in a variety of lbs.per-hour ratings.
it is also the most failure prone and troublesome.

If you're shopping for injectors, I'd suggest Bosch, even though
they can't seem to make some parts worth a damn, their injectors
are quite reliable and in many cases, reasonably priced.

Reply to this Message