'98 Grand Caravan Sport 3.3

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

jeh_98@yahoo.com - 27 Feb 2007 13:02 GMT

I need to replace the blower motor resistor. Anyone have first hand
knowledge of the location of it. Google gave me different
locatations, or maybe the same location with different access points?
I don't know- just looking for some good advice on how to get in and
change it quickly. It is COLD and I don't have a garage!

One article I read said I need to remove the glovebox
One article I read said it it under the hood, on the firewall,
passenger side.

Anyone?

Thanks!

Signature

Posted via a free Usenet account from http://www.teranews.com

Reply to this Message

Hachiroku ハチロク - 16 Mar 2007 21:34 GMT

On Tue, 27 Feb 2007 08:02:23 -0500, jeh_98 wrote:

> I need to replace the blower motor resistor. Anyone have first hand
> knowledge of the location of it. Google gave me different locatations, or
[quoted text clipped - 8 lines]
>
> Thanks!

Not knowing for sure, I would look on the firewall. It will be a lot
easier than tearing the glovebox out (BELIEVE ME!!!) It will probably be
about 1.5" wide and 2-2 1/2 inches long, covered. Unscrew the cover and
have a look!

Reply to this Message

Comboverfish - 16 Mar 2007 21:56 GMT

On Feb 27, 7:02 am, jeh...@yahoo.com wrote:

> I need to replace the blower motor resistor. Anyone have first hand
> knowledge of the location of it. Google gave me different
[quoted text clipped - 7 lines]
>
> Anyone?

Passenger side firewall, underneath the cowl overhang. Look for a
large 5 terminal connector that appears to be "plugged into" the
firewall. Unplug this connector, and what's left is the blower
resistor. It is held in place by tabs that are integrally moulded
into the plastic housing, so you need to gently pry the assembly away
from the firewall to remove. If need be you can break it as long as
you have the correct replacement ready to go.

Toyota MDT in MO

Reply to this Message