Once in a great while, maybe every 20 starts, the remote start
(Audiovox Prestige APS-785) will fail, and the factory "Security"
indicator on the dash will flash. I can clear this by leaving the
truck sit for 10 minutes; not a huge deal, except that it usually
happens at the worst possible time - I was late to work again. Anyone
have experience fixing passlock problems on Chevy trucks? This is a
1999 Tahoe. Remote start/alarm control module has been replaced due
to a problem with a door lock signal. All other remote wiring/parts
were left intact. All other new parts besides the control module are
still in the box, so I guess there may be other parts that can be
swapped out. No-start problem existed before and after replacing the
control module. I am not very familiar with the passlock disabling
mechanism of the remote/alarm system, only that it works most of the
time.
Any help/ideas would be appreciated!
ponchonutty - 16 Mar 2007 02:26 GMT
Well, if you aren't too sure what to do or how to do it, I'm not sure if
I can help. Simply you either have a bad bypass or bad PK2 system.
When it locks you out, does this happen when you try to start it with
the key or when using the RS?

Signature
ponchonutty
http://www.automotiveforums.com