buy the directed elctronics brand it is the best for the money and make sure it
is soldered in place and no crimp connections of any kind are used
> Hi:
>
[quoted text clipped - 15 lines]
>
> David
David - 01 Dec 2007 21:45 GMT
> buy the directed elctronics brand it is the best for the money and make
> sure it
> is soldered in place and no crimp connections of any kind are used
I was warned by a profesionall installer not to buy Directed Electronics
brands as well. Can anyone verify that some of those are better than
Bulldog at least?
I can handle the install and splicing the wires but thanks for the
recommendations. For someone who doesn't have experience with wiring I
would suspect they would have issues with both crimping and soldering.
>> Hi:
>>
[quoted text clipped - 19 lines]
>>
>> David
> Also, what are the best car starters ? I plan to install myself but I'd
> like a professional unit, not one of these units advertised as a DIY
> starter.
Be prepared to spend all day putting it in. I've done two, for Ford
full-size vans. These units were sold at the Ford dealer's parts counter and
had instructions just for Fords. That alone is worth it. Maybe your dealer
has one for your brand. Worked great but the installation took a lot of
time. Not particularly hard, but very time consuming.
Mine were Ford-branded units but I think they were made by Code Alarm. The
CA-500 sounds like the two I had.
David - 02 Dec 2007 04:33 GMT
>> Also, what are the best car starters ? I plan to install myself but I'd
>> like a professional unit, not one of these units advertised as a DIY
[quoted text clipped - 8 lines]
> Mine were Ford-branded units but I think they were made by Code Alarm.
> The CA-500 sounds like the two I had.
I'll check with the dealer and take a closer look at Code Alarm (I did use
them for vehicle alarms years ago).
I already have my steering column torn apart since I've had to rewire a few
things to get around past problems and I don't plan to wire all the lights
in. A horn honk a single light is more than enough of an indicator for me
that the car is running (actually, it's quite old and the sound alone would
probably be enough).
Any idea how your unit functions? Does it seem to crank for any additional
time after the engine actually starts?
Bob M. - 02 Dec 2007 17:59 GMT
> Any idea how your unit functions? Does it seem to crank for any
> additional time after the engine actually starts?
I don't have that van anymore. Since I started it from inside the house (it
was parked on the street) I have no way of knowing the answer, but my guess
is no.