1991 Eagle Summit Hatchback Windshield Wipers

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

deuce03@gmail.com - 19 Apr 2008 00:20 GMT

Hi all I have a 91 Eagle Summit Hatchback and the wipers just stopped
working.....I checked the fuse and it's good and when i got home i
turned off the engine and switched the key to acc position and i can
hear the motor working so can someone tell me what might have
happened? Please and how i can fix it.

Thanks,

Gyspyangel

Reply to this Message

Tegger - 19 Apr 2008 02:39 GMT

deuce03@gmail.com wrote in news:d74c48e2-2ef0-411e-8f1d-cbb7466b7b47
@b5g2000pri.googlegroups.com:

> Hi all I have a 91 Eagle Summit Hatchback and the wipers just stopped
> working.....I checked the fuse and it's good and when i got home i
> turned off the engine and switched the key to acc position and i can
> hear the motor working so can someone tell me what might have
> happened? Please and how i can fix it.

Link arm has popped off the wiper motor crank ball, most likely.

Need to replace the whole arm, as the nylon insert is surely not available
alone.

Signature

Tegger

Reply to this Message

deuce03@gmail.com - 19 Apr 2008 06:28 GMT

> deuc...@gmail.com wrote in news:d74c48e2-2ef0-411e-8f1d-cbb7466b7b47
> @b5g2000pri.googlegroups.com:
[quoted text clipped - 12 lines]
> --
> Tegger

Would you know where I might get that piece and how to access it?
Thanks

Reply to this Message

Tegger - 19 Apr 2008 18:36 GMT

>> deuc...@gmail.com wrote in news:d74c48e2-2ef0-411e-8f1d-cbb7466b7b47
>> @b5g2000pri.googlegroups.com:
[quoted text clipped - 14 lines]
> Would you know where I might get that piece and how to access it?
> Thanks

I'm not familiar with your model, but wiper linkages are pretty much
universally inside the cowl at the base of the windshield. There is a
molding or body sheet metal part covering the cowl. This must be removed
for access to the wiper linkage.

The part is almost certainly dealer-only. It shouldn't be that expensive,
less than $50 or so.

Signature

Tegger

Reply to this Message