Replacinfg front turn signal on C5 corvette

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

terry@grable.com - 20 May 2006 21:55 GMT

First you need to jack up the car. You may want to remove the wheel but
not nessary. There is a plannel just behind the air dam remome the 3
screws on the bottom and two on the side next to the wheel. Remove
pannel this will give you access to the bulb socket. Twist the socket
counter clockwise and pull out. Pull the bulb straight out. It's a
simple as that.

Reply to this Message

ZÿRiX - 21 May 2006 12:36 GMT

Can you jack up just 1 corner of a C5???

Signature

ZÿRiX
(¯`'..(<>..<>)..'´¯)

> First you need to jack up the car. You may want to remove the wheel but
> not nessary. There is a plannel just behind the air dam remome the 3
> screws on the bottom and two on the side next to the wheel. Remove
> pannel this will give you access to the bulb socket. Twist the socket
> counter clockwise and pull out. Pull the bulb straight out. It's a
> simple as that.

Reply to this Message

Keith - 21 May 2006 14:11 GMT

You can do this without jacking up the car. You have to remove the
little rubber support that supports the front of the hood, then turn on
the headlights so they raise up. Then you can reach your arm in there
to snag the bulb holder and remove it. You have to do everything with
one hand, but it can be done.

Reply to this Message

aRKay - 22 May 2006 14:36 GMT

> You can do this without jacking up the car. You have to remove the
> little rubber support that supports the front of the hood, then turn on
> the headlights so they raise up. Then you can reach your arm in there
> to snag the bulb holder and remove it. You have to do everything with
> one hand, but it can be done.

This is how I changed mine. Be careful not to drop the bulb. I now
have a spare lamp riding around inside the lens.

Reply to this Message