im working on this car, my uncle had changed this coil and it still doesnt
work. I need to know what wire is doing what to the coil so i can chase
the problem. Also I do have a meter I can test the coil he replaced to see
if its bad but not shure which numbers to look for? Any thing would help
451CTDS - 23 Nov 2005 21:57 GMT
Test the primary and secondary resistance of the known good coils
than test the suspect one. One ohmmeter probe to spark plug terminal,
other probe to coil ground = Secondary resistance = approx 2K ohms
Ohmmeter to 2 input leads = Primary resistance = 10 ohms
These figures are guesses, I don't have a coil pack coil to test,
what matters is the values of the known good, verses the suspect one.
If all three coils show same resistance [ also check discarded coil ]
than you have a problem with the wiring / or control box.
Before doing any fancy probing, disconnect coil from circuit to
prevent VOM from reading control box, and to prevent any voltage
present from frying VOM set to Ohms scale
KjunRaven - 24 Nov 2005 19:13 GMT
> im working on this car, my uncle had changed this coil and it still
> doesnt work. I need to know what wire is doing what to the coil so i
> can chase the problem. Also I do have a meter I can test the coil he
> replaced to see if its bad but not shure which numbers to look for?
> Any thing would help
ign. module usual suspect if coil good and no spark......
fred747 - 26 Nov 2005 22:21 GMT
i dont have the book and not familer with car where is ign. module and how
could i test? thanks