The transfer case selector switch does not light anymore and nothing happens
when I select any 4WD modes. The transfer case remains in 2WD. It is acting
like the system is not getting any elecrical power. The 4WD fuse under the
rear passenger seat is good and I measure appropriate voltages on both sides
of the fuse. Has anyone had a similar problem or have any suggestions?
Thanks,
Chris
shiden_kai - 30 Oct 2004 01:13 GMT
> The transfer case selector switch does not light anymore and nothing
> happens when I select any 4WD modes. The transfer case remains in
> 2WD. It is acting like the system is not getting any elecrical power.
> The 4WD fuse under the rear passenger seat is good and I measure
> appropriate voltages on both sides of the fuse. Has anyone had a
> similar problem or have any suggestions?
This is a known and common problem. You need to take it in to
a dealership and have it checked out. At the very least, it will need
a software update to the t/case module....and at the worst, it will
need a new module and software update.
Ian