95 S-10 turn signals?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Bat- Man - 28 Aug 2005 17:26 GMT

OK here goes, my trucks signal lites dont work only once in a while.

My hazard signals {all 4} work just fine,but the turn signals are
spooky.

If I put the two front signal bulbs in the front lites the arrows come
on on the dash and stay on all the time, but if I take the two bulbs out
of the front lites the signal lites will work some time and not
sometime.

Nnyone got any Ideas it got me puzzled.

TIA Bat-Man

Reply to this Message

no one - 29 Aug 2005 03:14 GMT

> OK here goes, my trucks signal lites dont work only once in a while.
>
[quoted text clipped - 9 lines]
>
> TIA Bat-Man

BAD ground..

Reply to this Message

Bat- Man - 30 Aug 2005 04:46 GMT

I changed the flasher, now everything works just fine with the signals
but 1 thing.

When my headlites are on the arrows in the dash stay on all the time,but
when I put the signals on they blink just fine, where would I look for
the bad ground at? Would it be the Headlite switch?
TIA Bat-Man

Reply to this Message

vwtopdown@gmail.com - 30 Aug 2005 17:44 GMT

I would make sure all the bulbs are the correct duel or single filament
ones and no lights are out including parking lights. I had a lesabre
that did this and it turned out to be a front parking light bulb was
bad. light on the dash glowed like yours did but only when the
headlights were turned on.

fwiw
mike

Reply to this Message