Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
HomeAnnouncements
Discussion Groups
By Brand
BMWChevroletDodgeFordGMHondaLexusMercedes-BenzNissanPeugeotToyotaVolkswagenOther Brands
By Topic
4x4 CarsRVsDrivingMaintenance & RepairCar AudioCollectible Cars
Country Specific
Australian ForumsUK Forums
ArticlesAuto InsuranceBuyingCars & TechnologyMaintenanceMiscellaneousSafety
DMV Resources
Related Topics
MotorcyclesBoatsMore Topics ...

Car Forum / Chevrolet / Chevrolet Trucks / December 2005

Tip: Looking for answers? Try searching our database.

1996 Chevy K3500 454 rough running problems

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Landmanil - 15 Nov 2005 20:36 GMT
I've had my 96 K3500 with a 454 7.4L engine for a few months and ever
since the weather cooled down from the hot summer days it's hit or miss
everytime I try to start it.

Now when I try to start it, it starts up running very rough about 70%
of the time. It usually stays running like this for 15-20 min and
mysteriously it runs normally again.  When it's running rough, the rpms
head down from the 1500 or so to about 600 and bounce back up to 1500
back and forth until it heats up.  It runs fine otherwise and it's been
relatively well maintained.

I've been throwing parts and work at it for a while hoping to catch the
problem but so far no luck.  It has a full tuneup done with plugs,
wires, cap & rotor,  changed Idle Valve, changed upper and lower intake
manifold gaskets, and changed EGR valve.  My next guess is that it
might be fuel related, maybe an injector, fuel pressure regulator, or
fuel pump relay??

Please help, I've been scratching my head about this problem for a
while and I need to fix it before winter hits.

Thank you
Daveman - 07 Dec 2005 17:01 GMT
You may want to check the crank sensor and the distributor sensor. I've
got the same motor in a 3/4 ton. Had that problem. Computer couldn't
figure out where it was firing. Mine was deeper though. Gear on the
bottom of the distributor was installed wrong during the rebuild. Threw
the computer completely out of wack!
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.