 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chevrolet / Chevrolet Trucks / January 2006how to get the wipers off s10 1989
I posted, a few weeks back , a question as to how to get the wipers off a 1989 s10 ; the answer is: you pry them off; I used a screw driver on one, and the claw of a hammer on the other; they are held on by splines on the shaft base; the tab you'll see fits into a recessed ring on the base of the shaft, but playiing with that is pointless.Just get some lever under the base of the wiper and push them up, away from the hood. Not so obvious, Chevy. > I posted, a few weeks back , a question as to how to get the wipers off a > 1989 s10 ; [quoted text clipped - 5 lines] > > Not so obvious, Chevy. thats the Best way to do it As I stated.. But u only need to PRY up on the ARM 180 Degrees away from That CLAMP/PIN .. playing with the pin is STUPID !!! I ment to thank everyone who posted back to me - many thanks - I'd still be out there without your help. > > I posted, a few weeks back , a question as to how to get the wipers off a > > 1989 s10 ; [quoted text clipped - 9 lines] > the ARM 180 Degrees away from That CLAMP/PIN .. > playing with the pin is STUPID !!! lift the arm away from the windshield. once you get it pulled back you should see a small tab to the right of the arm at the base. slide that tab sideways and you willtock the arm spring and onlock the arm from the regulator. them gently pull the arm off the truck. > I posted, a few weeks back , a question as to how to get the wipers off a > 1989 s10 ; [quoted text clipped - 7 lines] > > Not so obvious, Chevy. > I posted, a few weeks back , a question as to how to get the wipers off a > 1989 s10 ; [quoted text clipped - 5 lines] > > Not so obvious, Chevy. eons ago, like fifty years or so they were held on by a nut, be it GM, Ford or chrysler. Then they went to what you found around mid 50's on most cars. This got rid of the threads stripping on the stud, or the stud snapping off under the hands of a king kong wanna be. And they have worked just fine all these years. Whitelightning As I posted in a thread in one of the newsgroups, in response to your question, there is a hole at the base of the part of the arm that lifts up. Stick a pin or nail through that hole when it lines up with a hole in the static portion of the arm and it'll wiggle off REAL easy. > I posted, a few weeks back , a question as to how to get the wipers off a >1989 s10 ; [quoted text clipped - 5 lines] > > Not so obvious, Chevy. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.