Brake controller hookup on 2007 Chevy Silverado

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Brent Marsden - 13 May 2007 03:10 GMT

I have a Reese brake controller and want to install on my 2007 Silverado but
it has to be hard wired, which wire goes to what? The reese has four wires,
they are Power, Ground, Stop Light, and Brake(blue).

Tks
Brent

Reply to this Message

JBDragon - 13 May 2007 06:14 GMT

I thought the Trucks are basically all ready wired, you need a simple wiring
harness that plugs into some connector under the dash and you hook the
controller up to that. If your truck didn't come with it, go ask the Chevy
Dealer! It can't be very much for it. I know I can order one for my truck
at JC Whitney also for a whole $9.99. This is a example for my truck. They
didn't show one for a 2007 so it might be different then my truck. It
should be easy enough. I haven't gotten one yet since I don't tow anything
that requires one.

http://www.jcwhitney.com/autoparts/Product/tf-VehicleBrowse/s-10101/Pr-p_Product
.CATENTRY_ID:2004463/p-2004463/N-111+2003+200005138+600007496/c-10614

>I have a Reese brake controller and want to install on my 2007 Silverado
>but it has to be hard wired, which wire goes to what? The reese has four
>wires, they are Power, Ground, Stop Light, and Brake(blue).
>
> Tks
> Brent

Reply to this Message

Bill - 13 May 2007 13:39 GMT

If you already have the 7 way plug installed from Chevy, there is an adapter
plug that connects to about where your left foot rests while driving.
Look in your owners manual.

Signature

please reply to bargerw NO @ SPAM bellsouth.net and remove the NOSPAM

Reply to this Message