 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chevrolet / Chevrolet Trucks / September 2004help needed -exhaust manifold
I just purchased a set of Hermoff 6123 and 6124 manifolds for my 1994 Chevy truck. These manifolds have a hole for a AIR emission device which my truck does not use. What do I use to plug these holes on my application? My local autoparts store where I purchased these items was unable to provide me with anything that would fit. Thanks for your help. Depending on what size holes they are a dealer should be able to aquire the correct size plugs. The smaller size can use a 1/4 inch pipe plug but it must be BRASS . They larger size I believe was 18mm;same size as the ever present oxygen sensor. There have been notes in the parts catalog giving correct pn's for the plugs. The dealer might jack you on the $ for the plugs because he didnt get the BIG $$$$$ for the manifolds sr the former gm parts guy >I just purchased a set of Hermoff 6123 and 6124 manifolds for my 1994 >Chevy [quoted text clipped - 5 lines] > with > anything that would fit. Thanks for your help. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.