Took my '03 Sierra into the dealer a while back and asked them to check out
a clunking sound I could feel in the steering wheel when turning. They said
it was a known problem with the steering linkage (or something) and they
would have to order a part and that they would contact me when it came in.
Last week, I get a post card saying that my part was in and to call to make
an appointment.
I call the guy and he isn't sure what I'm calling about but makes an
appointment. I bring it in and within a 1/2 hour they are done and the
ticket says that they no longer replace the intermediate steering shaft but
rather they just lube it per bulletin no. 1558063 E7700. I asked WTF and he
explained that GM doesn't allow them to replace the shaft anymore because it
doesn't really fix the problem. Rather, they take it apart and use a new
lube and it fixes it.
I haven't had time to check the bulletin yet but was wondering what others
are experiencing with this.
Thanks,
Rosscoe
Jonathan Race - 20 Feb 2005 17:51 GMT
I had the intermediate steering shaft replaced under waranty in my '04 for
exactly the same issue, and I can attest to the fact that it indeed did not
fix the problem. Frankly, I don't think it's in the intermediate shaft at
all - it feels more like in the tie rods, steering stabilizer, idler arm
area. I honestly believe it is more closely connected to the parts that
connected to the wheels because I notice that I never feel it in the
steering wheel, but hear it in the steering or suspension components when I
am turning at very slow speed and go over a small bump.
Cheers - Jonathan
> Took my '03 Sierra into the dealer a while back and asked them to check
> out a clunking sound I could feel in the steering wheel when turning.
[quoted text clipped - 16 lines]
> Thanks,
> Rosscoe
MR - 23 Feb 2005 13:27 GMT
I recently had my interm. steering shaft replaced under warranty(02).
Although, I only have a few K miles on it since then, it seems to have
fixed the problem so far. I would insist on new part or go to another
dealer.
MR
>I had the intermediate steering shaft replaced under waranty in my '04 for
>exactly the same issue, and I can attest to the fact that it indeed did not
[quoted text clipped - 27 lines]
>> Thanks,
>> Rosscoe
Isidoro Pulido - 15 Mar 2005 05:50 GMT
I just had my Intermediate Steering shaft replaced on my '03 Yukon under
warranty. I've only driven about 250 miles, but it seems to have done the
job. I had the original steering shaft lubed 4 times with the last one only
lasting 200 miles before the noise came back.
Regards,
LoloMan
> I recently had my interm. steering shaft replaced under warranty(02).
> Although, I only have a few K miles on it since then, it seems to have
[quoted text clipped - 33 lines]
> >> Thanks,
> >> Rosscoe
Jessie Herrera - 21 Feb 2005 08:43 GMT
Hi,
That does not sound right. I never heard of fixing a clunk by lubing
it. When under your truck move the tires back and forth. You may see
movement between the control arms. It will also have a small clunk on
any worn parts. Your best bet would be to find a suspension specialty
place that sells jobber to all the parts store. Someone like moog or TRW
should make the part. Tell them you work for the government and they
will give it at jobber cost. These places do not sell retail. I don't
know where you are so I can't recommend someone. Here in San Diego
(actually El Cajon), California is a place called WABCO. They are a
specialty place that sells to all the auto stores here. Thats where I
get my parts. You may want to search the net for a place like that.
Check under Moog or TRW suspension parts. Good luck.
Jessie
> Took my '03 Sierra into the dealer a while back and asked them to check out
> a clunking sound I could feel in the steering wheel when turning. They said
[quoted text clipped - 16 lines]
> Thanks,
> Rosscoe
Dave - 21 Feb 2005 18:42 GMT
Follow this link for answeres to the intermediate shaft service
bullitens. The grease packing was the old fix. The new service
bulliten is to replace the shaft with a redesigned one.
http://www.gm-trucks.com/forums/index.php?showtopic=26037
>Hi,
> That does not sound right. I never heard of fixing a clunk by lubing
[quoted text clipped - 31 lines]
>> Thanks,
>> Rosscoe