 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chevrolet / Chevrolet Trucks / March 2005no spark
hi, i have a 1991 chevy k 1500, with a 5.7 litre engine, and an automatic trans. the problem i have is that i have no spark, there is power at the coil, but none after the distributor, i have changed the coil, distributor, computer, and the wire running from the coil to the distributor, with no change. I have a tach and it is not responding at all when i turn the truck over, i was wondering if anyone had any ideas. thanks a lot replace the magnetic trigger and/or module assy.  SignatureMad-Dog '79 Chevy K-10 Slightly modified pictures can be found here: http://mad-dog16.tripod.com/ -- > hi, i have a 1991 chevy k 1500, with a 5.7 litre engine, and an > automatic trans. the problem i have is that i have no spark, there is [quoted text clipped - 3 lines] > all when i turn the truck over, i was wondering if anyone had any > ideas. thanks a lot check the module in the distributor, very common problem. > hi, i have a 1991 chevy k 1500, with a 5.7 litre engine, and an > automatic trans. the problem i have is that i have no spark, there is [quoted text clipped - 3 lines] > all when i turn the truck over, i was wondering if anyone had any > ideas. thanks a lot Who makes a good replacement? The last one I picked up, died a short time later, I think it was a borg Warner. Any Brand recomendations? Cheers > check the module in the distributor, very common problem. > > hi, i have a 1991 chevy k 1500, with a 5.7 litre engine, and an [quoted text clipped - 4 lines] > > all when i turn the truck over, i was wondering if anyone had any > > ideas. thanks a lot > Who makes a good replacement? > > The last one I picked up, died a short time later, I think it was a borg > Warner. Any Brand recomendations? Delco. You're wasting your time with anything else. MSD makes a HP replacement module that will beef up the spark in the process, Here is a link to the page describing the unit and it's benefits.... http://www.msdignition.com/ignition_13_8364_8225.htm SignatureMad-Dog '79 Chevy K-10 Slightly modified pictures can be found here: http://mad-dog16.tripod.com/ -- > Who makes a good replacement? > [quoted text clipped - 11 lines] >> > all when i turn the truck over, i was wondering if anyone had any >> > ideas. thanks a lot > Who makes a good replacement? > > The last one I picked up, died a short time later, I think it was a borg Warner. Any Brand recomendations? Did you bed it in silicone compound. If not, it won't last long. H Very good point Hairy.... SignatureMad-Dog '79 Chevy K-10 Slightly modified pictures can be found here: http://mad-dog16.tripod.com/ -- > >> Who makes a good replacement? [quoted text clipped - 4 lines] > Did you bed it in silicone compound. If not, it won't last long. > H Very good point, alot of heat generated by the little bugger. Usually, if you take the old one out, you will see that it is cooked. Used a delco, 8 months, still ticking. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.