Clunking Noise

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Don Torgrimson - 31 Mar 2005 00:40 GMT

I have a 2000 S-10 4x4 with the 4.3L

My problem is a clunking sound which seems to be coming from under the front
end. It only happens when
the steering wheel is turned hard to the right under initial load.
Any idea what could be causing this?

Signature

Don Torgrimson
23 Alderwood Blvd.
St. Albert,AB
T8N-3M4
dontorg@shaw.ca

Reply to this Message

no one - 31 Mar 2005 01:48 GMT

Transmission member Mount is Broken on the LEFT SIDE

if yours is like my 89 4X4 then they Break every year since I started
plowing snow with it in 1995

Clunks HARD When you Accellerate around a Corner in a normal Fashion.
The Mounts are Actaully Right under your SEAT, Where the tranny Cross
member Meets the outer Frame ..

I usually Have to Change Both in the Spring..

> I have a 2000 S-10 4x4 with the 4.3L
>
> My problem is a clunking sound which seems to be coming from under the front
> end. It only happens when
> the steering wheel is turned hard to the right under initial load.
> Any idea what could be causing this?

Reply to this Message

High Sierra - 31 Mar 2005 17:32 GMT

> Transmission member Mount is Broken on the LEFT SIDE
>
[quoted text clipped - 13 lines]
>> the steering wheel is turned hard to the right under initial load.
>> Any idea what could be causing this?

Another possibility is a Torsion bar rubber bushing.

Reply to this Message