defrost problems

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

james1119 - 26 Jul 2005 15:20 GMT

I have a 1995 Chevy C1500 with no air going to the defrost. Lots of air
going to vents and floor when those areas are selected. I replaced the
actuator, but the air is still being diverted away from the dash to the
floor board vent. I have looked for an unattached vacuum hose, but no
luck yet. Any help would be greatly appreciated!!

Reply to this Message

helly - 28 Jul 2005 04:36 GMT

does the selector door move freely when disconected from acctuator?
if not something proboblt fell down in there through the vent

Reply to this Message

james1119 - 28 Jul 2005 05:51 GMT

the selector door does try to open but it doesn't open all the way, just a
little. thanks for replying!

Reply to this Message

james1119 - 28 Jul 2005 06:15 GMT

i have never taken off the dash before. is there a website or a manual to
help me do this?? i'm clueless on how to even start taking the dash
apart. thanks for any help!

Reply to this Message

helly - 28 Jul 2005 23:56 GMT

a service manual you can get at the local librairy (most of the time will
help you step by step)

Reply to this Message