 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chevrolet / Chevrolet Trucks / August 2005Blazer Starter
Hi, 91 Chevy Blazer S-10 Starter needs replacement. I have never seen such a pain in the a**. Woa! I had to take off part of the undercarriage cross-member and I still can't get the starter out. Do you have to pull the axle? Help appreciated. Waz 91 S-10 4X4 here....Need to drop the crossmember but didn't need to pull an axle...Do remember it was a major PITA.... Perhaps I did need to drop the front driveshart to get the Torque convertor cover off (or was that for something else?) Ken Ken, you were close to it, I finally had to break the axle half shaft loose and pry it down too, as well as take off the cross member underneath, and then I managed to slip it down and out. WHEW.. THANKS Waz > 91 S-10 4X4 here....Need to drop the crossmember but didn't need to > pull an axle...Do remember it was a major PITA.... [quoted text clipped - 3 lines] > > Ken I have an 89 S-10 4wd Blazer had to loosen right motor mount and jack it up a little. > Hi, 91 Chevy Blazer S-10 > Starter needs replacement. [quoted text clipped - 3 lines] > Help appreciated. > Waz |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.