 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Car Forum / Chevrolet / Chevrolet Trucks / December 200693 s-10 4x4 Blazer
I took the plenum off this eve.and it has gas in all around the spider where the poppets are.I haven't found any info. on what the repair is yet.The price of the unit is more cost than I paid for the truck.I would have like to have got it running to see if the trans.is good.I got the dash pocket open I need a decode on the 2 different trans. types.Theres a lot of #s and letters in there that is barely readable. Thanks! Bobby bobby-if the plenum is still off-make sure the neg. batt. term is unhooked and then turn the ignition to the on position(doing nothing until you...)go under the hood and then put the neg. cable in place(assuming the pos. is still on the battery) watch the fuel pressure regulator real close, you'll hopefully see some fuel leak out of the 'weep' hole in the regulator. If so, an aftermarket company named 'HELP'-Motormite makes that part. You'll probably pay $50-$75 for the part, that is if you luck out and the problem isn't the injector itself. Done many of these and most times, the fuel leakage is the regulator. Good luck and chances are that tranny is a 4L60 E. jerry@peru-motors.com > I took the plenum off this eve.and it has gas in all around the spider > where the poppets are.I haven't found any info. on what the repair is [quoted text clipped - 3 lines] > a lot of #s and letters in there that is barely readable. > Thanks! Bobby Jerry thanks for the info.the plenum is still off....and i'll try as you suggested...and let you know about the leak location.I was hoping it might turn out to be a 700r-4 trans..Thanks Again! Bobby > I took the plenum off this eve.and it has gas in all around the spider > where the poppets are.I haven't found any info. on what the repair is [quoted text clipped - 3 lines] > a lot of #s and letters in there that is barely readable. > Thanks! Bobby You don't need RPO's to see which transmission it is. a TH7004/4L60 Non-E will have a 4 wire plug. The 4L60-E will have around a 12-18 wire plug. Try getting a salvage yard fuel spider. Charles Charles I appreciate the info.on the trans.I did what Jerry said in a previous post..and sure enough the regulator was leaking..I ordered one from Advance Auto for under 40 bucks...hopefully I wont need the spider.Thanks! Bobby Bobby-I'd bet the regulator will work that is unless there are further problems but I guess that is what life is about! You've always got this site to fall back on. Betcha you've got a 4L60E also which won't help you but...good luck jerry@peru-motors > Charles I appreciate the info.on the trans.I did what Jerry said in a > previous post..and sure enough the regulator was leaking..I ordered one > from Advance Auto for under 40 bucks...hopefully I wont need the > spider.Thanks! > Bobby |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.