Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
back?
Please help
John
jdoe - 14 Feb 2005 12:48 GMT
The cowl comes off and you do it from underside or take the plenum off to do
it.
Larry
> Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
> back?
>
> Please help
>
> John
mic canic - 17 Feb 2005 02:05 GMT
i used a Snap-On swivel socket and a Snap-On air ratchet from underneath
15 minute job
> The cowl comes off and you do it from underside or take the plenum off to do
> it.
[quoted text clipped - 5 lines]
> >
> > John
Steve - 14 Feb 2005 12:48 GMT
They can be done from the bottom, but it requires a good bit of
dexterity. You can also pull the wiper module and get them from the
top. This takes longer but is much easier.
Dave Best - 15 Feb 2005 00:05 GMT
I agree take the wiper box (cowl) off, and the plenum off also. Go buy
yourself a set of wires, and the plenum gasket, and tighten the plenum
side support (the one that goes in the end of the block) last after
torquing the other plenum bolts. As said before "I hope you have the
factory service manual"
>Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
>back?
>
>Please help
>
>John
JOHN WALKER - 18 Feb 2005 12:55 GMT
Job competed and a total success. Thanks for all the help.
John Walker
> Does anyone know how to get to plugs 3 & 5, on a 3.3L, which are in the
> back?
>
> Please help
>
> John
Steve - 20 Feb 2005 01:08 GMT
Just curious, which way did you go about it?
Job competed and a total success. Thanks for all the help.
John Walker
<<<
mwitte - 09 Mar 2005 21:36 GMT
> Just curious, which way did you go about it?
>
[quoted text clipped - 3 lines]
> John Walker
> <<<
hey would that be the same way on a 2001 LXi with a 3.8? I haven?t
looked underneath yet.